Aquaquark ultrafiltrationUnits are basically a filtration process. UF uses membranes with a pore size of 0.01 micron and this acts as a barrier for bacteria, virus and other micro organisms without using chemicals.
The standard CDI-Low systems come in flow rates from 1.7 to 180 gpm (0.39 to 40.88 m3/hr), combining single or multiple (up to 8) IONPURE® CDI-LX modules on a frame with power supplies, controllers, piping, sample valves,
Sand and carbon filtration are typically used for achieving supplemental removals of suspended solids and pathogens not destroyed by the clarifocculation process.Aquaquark Activated Carbon Filters are used for
Deionization system is removal process of minerals namely cationic and anion ions from water. This process is done via ion changers which are at process and are full with resin. Unity where cationic ions changed called
Aquarquark Degassifier Systems are used to remove dissolved gasses such as Carbon Dioxide (CO2) and Hydrogen Sulphide (H2S) from water. Water enters the unit from a distribution diffuser at the top, it then flows
The MBR process can be configured in many different ways depending on project specific nutrient removal objectives. Anoxic zones before or after the aerobic treatment may be used for denitrification, depending on
Aqualine MBBR systems contain small biomass carriers (0.93-0.95 SG) with a density less than water. These carriers provide a large protected surface area for bacteria production and allow the areas to retain active
Waste water; It is divided into two categories; black water and gray water. Gray water has low nutrient levels and that’s why treatment costs are low. Gray water is generated from wash hand basin, showers